The Healthy Journal - Gluten, Dairy, Sugar Free Recipes, Interviews and Health Articles (2023)

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

Is it better to run a pool pump at night or day?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.

What are the best hours to run your pool pump?

For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.

What is a good pool pump schedule?

Most pool owners run their variable speed pump for 12 hours per day (3-4 hours on high speed for the pool cleaning system and 8-9 hours on low speed for filtration).

How many hours should you run your pool pump per day?

Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day.

Should I run my pool pump during the day or at night?

Do pool pumps use a lot of electricity?

One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.

When should you not run your pool pump?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

What is normal speed for pool pump?

Traditional pool pumps are single speed versions, meaning they run at one speed, all the time. The normal running speed for a 1 hp single speed pump is 3450 rpms, pumping about 50 to 75 gallons of water per minute. These pumps usually run about 6-8 hours a day for proper water filtration.

Should I turn off pool pump when raining?

The Equipment. There is no need to turn off your circulation system during a rain storm. We need the chemicals to still work and want the dirt and debris to be filtered out just like under normal circumstances. Never try to change settings on the pool pump or at the timer when it is raining.

How much does it cost to run a pool pump 24 hours a day?

For a pool pump with 1-½ HP, you can expect to spend $2.48 per day to run it. This is because 1-½ HP pumps consume around 2.14 kilowatts per hour, or 51.36 kilowatts per day (24 hours). According to the Energy Information Administration, the average cost of electricity in the U.S. is 10.35 cents ($0.1035).

How long should a pool pump run in 24 hours?

Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day. For pool pumps with D.E. filters, operating hours for normal weather and climate conditions tend to be anywhere from between 7 to 8 hours if you want to ensure proper filtration.

Can you leave a pool pump on for 24 hours?

Some commercial properties require 24-hour a day pump circulation, but as a homeowner, this is not advisable. If you are lucky enough to own an Energy Efficient, Variable Speed swimming pool pump (VSP) then , yes, technically you could run your pump for 24 hours a day.

Will pool warm up faster with pump on or off?

The pool would be warmer if you ran it 24/7 because all of the electricity that went into the pump motor except for approx 200 watts worth of motor heat, ends up as heat in the pool.

Should you run your pool pump while swimming?

One of the biggest questions when it comes to regular maintenance is the swimming pool pump. It's not necessary to have your swimming pool pump running at all times, as this can be a serious expense on your electric bill.

How much electricity does a pool pump use per month?

That's around 24 kWh per day, or around 720 kWh per month, just running only 10 hors per day. During the heat of the summer, many pumps need to run longer to maintain clear water. And remember, pool pumps never get to take a day off.

What does baking soda do for a pool?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.

Should you shock your pool every week?

Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.

Is it OK to turn pool pump off while on vacation?

Keep the pump and filter on while you are away.

Most pumps come have an automatic timer that makes this very easy. Set it before you leave to ensure the pool filter system will run at least 8 to 12 hours per day.

What is the ideal pool pressure?

For pool owners, the normal range is around 10 PSI; check your owner's manual for more information. Once you know what's normal for your filter, get in the habit of checking the pressure gauge once a week as part of your pool maintenance routine.

What RPM should I run my pool pump in the winter?

I usually recommend a combination of speeds. A high setting, somewhere in the high 2,000s for an hour or two. This will get your automatic pool filter running, if you have one, and move a lot of your pool water through your system. Then I suggest a medium RPM setting for 3-4 hours.

Is 6 hours enough for pool pump?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.

How long does the average pool pump last?

Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800. Your pool pump is the “heart” of your swimming pool as it circulates water throughout, bringing water through the filtration and heating systems.

How often should I backwash my pool?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.

How can I reduce my pool electricity usage?

7 ways to reduce your pool's energy usage